Product
Overview
PreTox 2000 Fast Dry
PreTox 7000 Stripper
PreTox 2000 DM
Product Acceptance
|
PreTox
8000 Paint Stripper
Data Sheet
Description
PreTox 8000 Paint Stripper is an environmentally advanced multi-functional chemical paint stripper
designed to remove multiple layers of lead based paint with one application. PreTox 8000 Paint Stripper renders lead based paint non-hazardous for disposal.
Environmentally advanced in design, this stripper contains NO methylene chloride or caustics, is nonflammable,
water rinseable and requires no
neutralization.
Recommended Uses
- Commercial Renovations
- Steel Structures
- Brick/Masonry
- Wood
- Historic Restorations
Compatible Removal Methods
- Hand Scraping
- Water Blasting
- Grit blasting
- Ice/CO2 blasting
Recommended Application Equipment
PreTox 8000 Paint Stripper can be applied by brush, roller, trowel, putty knife or mechanical spray equipment.
Industrial/commercial grade airless spray equipment capable of 1 gpm or greater is recommended. When
using such equipment, use a .045 tip or larger and remove all filters.
Thinning/Clean Up
Thinning is not required or recommended. No neutralization required. Clean up equipment with any aliphatic or aromatic solvent.
|
|
*** NEW***
Blast Enhancer
PreTox 8000 has been specially formulated to use with abrasive blasting processes to significantly increase blast production rates when removing tough industrial coatings.
Typically, blasting grit usage and labor is cut by half. Essential for CO2, Ice, and UHP projects.
Features
- No Methylene Chloride, Non Caustic
- Non-flammable
- Fast Dwell-Long Wet Time
- Application rate: 1,000 to 3,000 sq.ft/hr depending on substrate and equipment.
- Coverage 55 to 75 sq.ft/gal depending on paint and substrate.
- Flashpoint = >200º F
Product Use
- Mix thoroughly (Power drill and mixing bar are preferred).
- Apply to substrate.
- Allow to dwell.
- Observe and test to determine removal time.
- Remove.
- Sample waste as per federal and local regulation (for
assistance, call NexTec at 800-338-8296).
- Dispose of debris.
Safety Precautions
Safety goggles and butyl rubber or neoprene gloves are recommended. Maintain adequate ventilation in confined areas. If misting is expected use NIOSH approved organic vapor chemical cartridge respirator. See MSDS
for complete health and safety information
|
| To
the best of our knowledge the technical data herein are true and accurate at the date of
issuance and are subject to change without prior notice. No guarantee of accuracy is given
or implied. Manufacturer warrants that the Products are free from defects in material and
workmanship under normal use and proper storage. Manufacturer’s obligation under this
warranty shall be limited to the replacement of any product that may be defective within
one year from the date of shipment to the original purchaser, and which
Manufacturer’s examination discloses to Manufacturer’s satisfaction to be
defective or at the Manufacturer’s option, to refund Distributor in an amount equal
to the purchase price paid by Distributor. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR USE, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON MANUFACTURER’S PART, AND
MANUFACTURER NEITHER ASSUMES, NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR MANUFACTURER,
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. THIS WARRANTY SHALL NOT
APPLY TO PRODUCTS OR ANY PART THEREOF WHICH HAS BEEN SUBJECT TO FREEZING, EXCESSIVE HEAT,
DILUTION, IMPROPER MIXING, IMPROPER STORAGE, OR IMPROPER APPLICATION |
4050 Westmark Drive. Dubuque, Iowa 52002 www.pretox.com
1-800-338-8296